Before understanding the price of stainless steel luminous characters, we need to understand one problem, that is, stainless steel itself does not emit light, so why can stainless steel luminous characters emit light? The reason is very obvious, because the stainless steel luminous characters have built-in LED light sources.
After the LED light source is powered on, light will be emitted. If it is a stainless steel luminous character with a hole on the front, then the front will have the effect of luminous characters. Similarly, if there are holes or blanks on the side or back, then the luminous surface is on the corresponding side. If there is no light source, the stainless steel characters made are ordinary stainless steel characters. The prices of stainless steel characters and stainless steel luminous characters are also different. The price of stainless steel luminous characters is about twice as expensive as that of non-luminous ones.
Therefore, people have to make shiny or non-shiny titanium characters according to their own needs. The price of stainless steel luminous characters is also constrained by a problem, that is, the material of stainless steel. The steel type commonly used by most sign manufacturers is 304. The surface of 304 stainless steel plate is beautiful and its application probability is diversified, with good corrosion resistance. It is more durable and corrosion-resistant than ordinary steel, and has high compressive strength. Therefore, the price is a little higher. Of course, you can choose ordinary stainless steel plates of lower quality, or consider daily use.
With the rapid development of urban planning and construction, there are more and more outdoor billboards and advertising light boxes, and more and more shops use stainless steel luminous characters as door signs on the streets. The price of stainless steel luminous characters has also become a new problem for everyone to consider. The following is an introduction to the price and calculation method of stainless steel luminous characters.
There are many types of stainless steel luminous characters on the market today, mainly including stainless steel flat edge characters, stainless steel exposed characters, back cloth light characters, etc., but their prices are basically 700-1000 yuan per square meter. The calculation method is roughly size * quantity * price. The size of more than one meter is length multiplied by width, and the number below one meter is calculated. Of course, some companies will calculate according to the following three conditions: 1. Calculate according to the size of the font 1. The area of ??the luminous characters below 1 meter is calculated by the maximum * price per centimeter.
For example, if you want to make a luminous character with a height of 60 cm and a width of 40 cm, the price is calculated by centimeter. If it is 8 yuan per centimeter, then the price of making luminous characters = 60 (according to the largest stroke of the character) * 8 = 480 yuan 2. The area of ??luminous characters above 1 meter is calculated by length * length. The price of making luminous characters = total area * price per square meter. For example, if you want to make a character with a height of more than 1.2 meters and a width of 1 meter, the price is 800 yuan per square meter, then the price of making luminous characters = total area 1.2 * 1.2 (according to the largest stroke of the character * the largest stroke of the character) * 800 = 1152 yuan. 2. Calculate by the number of fonts For many companies, there are often situations where the fonts are not large and the number is relatively large. In this case, the general luminous character store will calculate the price by quantity. Basically, each company has its own optimization algorithm. 3. Calculate the price by project For projects with a large number and large fonts, this case is basically calculated by project because there will be installation costs at this time, and the high-altitude installation also has delivery fees, logistics fees, etc. are included.
Email: gabby@minasign.com hello@minasign.com
Mon - Fri: 8:00am - 22:00pm PST
Sat - Sun: 10:00am - 18:00pm PST
Jiafeng Building, Dongshen Road 313, Tangxia District, Dongguan City, Guangdong, China
Work Hours:8:00am - 20pm
Address: A#509 Jiafeng Building, Dongshen Road 313, Tangxia District, Dongguan City, Guangdong, China
Pick Up Hours:8:00am - 5:00pm